Our epoxy floor primer dries quickly and adheres well to smooth, dry and slightly damp floors. This water-based primer is dry enough not to be tacky after just 6 hours and you can get a lot done with a small amount of product. So, do you want to get started quickly with your new floor or apply a coat over it? Then our floor primer is a good choice!
- Water-based.
- Dries quickly (in 6 hours at 20°C).
- Adheres well.
- Contains no solvent.
Where can you use it?
- New concrete floors.
- Cement floors.
- Floors that already have a layer of epoxy or polyurethane.
- Hard fired tiles.
- Ceramic floors.
You need approximately 100 grams of primer per square meter.
Other brands*
- Odorous
- Contains solvent
- Low aesthetic quality
- Difficult to apply
- Short shelf life and short curing
- Odorless
- Solvent-free and water-based
- High aesthetic quality
- Safe and easy to apply yourself
- Long shelf life and curing
- UV / Better sun resistance
- Extra hardened / for heavy loads
- Plasticizer resistant
Epoxy floor primer
Epoxy floor primer
Couldn't load pickup availability
-
In Stock
Fast delivery 1-2 working days
-
90 days return policy
In unopened packaging
-
10 years warranty
We ensure quality
The indicated surface areas are for one coat of coating. For the best results, apply two coats.
View full details- All our products are water-based
- Solvent-free and low odor
- Long pot life, quick curing
- Walkable after 10 hours, loadable in 1 week
- Safe and easy to apply yourself
- Easy to mix in the can
- Adheres very well to most surfaces
- Very strong and resistant to heavy loads
- Less dust and easy to clean
Other brands*
- Odorous
- Contains solvent
- Low aesthetic quality
- Difficult to apply
- Short shelf life and short curing
- Odorless
- Solvent-free and water-based
- High aesthetic quality
- Safe and easy to apply yourself
- Long shelf life and curing
Our epoxy floor primer dries quickly and adheres well to smooth, dry and slightly damp floors. This water-based primer is dry enough not to be tacky after just 6 hours and you can get a lot done with a small amount of product. So, do you want to get started quickly with your new floor or apply a coat over it? Then our floor primer is a good choice!
- Water-based.
- Dries quickly (in 6 hours at 20°C).
- Adheres well.
- Contains no solvent.
Where can you use it?
- New concrete floors.
- Cement floors.
- Floors that already have a layer of epoxy or polyurethane.
- Hard fired tiles.
- Ceramic floors.
You need approximately 100 grams of primer per square meter.
All applications of our coatings:
-
In the living room
Epoxy floor coating is ideal for the living room: wear-resistant, easy to clean and modern!
-
Bathroom
Epoxy floor coating is perfect for the bathroom: waterproof and easy to clean!
-
Garage or shed
Epoxy floor coating is ideal for the garage: very wear-resistant, liquid-tight and resistant to heavy loads!
Ready for your new floor?
Ready in 4 simple steps
Applying a 2-component epoxy coating is easier than you might expect. Read our comprehensive guide here!
View the manual- Choosing a selection results in a full page refresh.
- Opens in a new window.