Lava stone

A lava stone poured floor gives your floor the rugged look of natural stone: seamless, with no joints and a distinctive lava stone look. You build it up yourself with a base coat that you roll on and a skim coat that you spread with a flat trowel. Both layers are water-based two-component epoxy, available in 182 RAL colours. The result is a scratch-resistant, liquid-tight and low-maintenance floor.

Filter and sort

Filter and sort

Colour
    Clear
    Product
      Clear
      Remove all

      Jan van Huizen

      04-01-2024

      Great

      Beautiful deep color. Satisfied!

      Iris Boerhoeve

      18-12-2023

      The shed is tidy again.

      The floor of our shed coated with ecoating.

      Marcel van Dijk

      21-12-2023

      Well helped

      The guys at Ecoating really know their stuff. Helped well and quickly via the chat.

      Anton Ruurlink

      12-10-2023

      Fast delivery

      Easily ordered and quickly delivered to your home.

      Dave van Veen

      14-11-2023

      As agreed

      Friendly customer service and next-day delivery. Recommended.

      Lava stone poured floor

      A lava stone poured floor combines the rugged look of natural stone with the strength of a coating. The floor is seamless, with no joints, and has a distinctive lava stone look. You apply it yourself in two layers: a base coat and a skim coat, both water-based two-component epoxy, solvent-free and low-odour.

      At Ecoatingstore you choose from 182 RAL colours and find everything you need for the job: the two layers, epoxy floor primer, Aflak Pro and the complete lava stone tool set.

      What is a lava stone poured floor?

      A lava stone poured floor is a floor system made up of two coloured layers of epoxy. Each layer consists of an A and a B component that you mix in the tin.

      • The base coat (layer 1) is rolled out over the primed floor. It seals the substrate, lays down the colour and forms the foundation for the skim coat. Without that base, colour differences and absorption from the subfloor will show through in the end result.
      • The skim coat (layer 2) is spread over the cured base coat with a flat trowel. This layer determines the final result: the full colour, the even texture and the seamless, stone-like appearance. It fills small irregularities, giving you a smooth, even surface with no roller marks or visible transitions.

      How it differs from an epoxy floor coating

      An epoxy floor coating is rolled onto the floor in two thin coats of about 200 grams per m². With a lava stone poured floor you only roll the base coat; the skim coat, at about 400 grams per m², is spread with a flat trowel. That is why the floor has no roller texture, but the even, stone-like look you expect from a lava stone floor.

      How to build up a lava stone poured floor

      1. Preparation – make sure the substrate is clean, dry, and free of dust and grease.
      2. Primer – apply epoxy floor primer for adhesion, about 100 grams per m².
      3. Layer 1 – roll out the base coat, about 200 grams per m², and let it cure.
      4. Layer 2 – spread the skim coat with a flat trowel, about 400 grams per m².
      5. Extra skim coat (optional) – a second skim coat makes the effect even more beautiful: deeper in colour and more even in texture.
      6. Finishing – seal the floor with Aflak or Aflak Pro topcoat, about 80 to 100 grams per m².

      How much material do you need?

      You work out every layer from the number of square metres. For one coat of each:

      • Primer: about 100 grams per m²
      • Base coat: about 200 grams per m², so 5 kg for roughly 25 m² and 10 kg for roughly 50 m²
      • Skim coat: about 400 grams per m², so 10 kg for roughly 25 m²
      • Aflak: about 80 to 100 grams per m²

      So for a 25 m² floor you need 5 kg of base coat and 10 kg of skim coat. If you opt for two skim coats, allow 800 grams of skim coat per m² in total: 10 kg then covers roughly 12.5 m².

      Lava stone poured floor in 182 RAL colours

      The base coat and the skim coat are both available in 182 RAL colours, so your floor gets exactly the shade you have in mind. Mixed colours are made to order. Do order enough of your colour in one go: with a repeat order there may be a slight colour difference between batches.

      Properties

      • Seamless, no joints, with a distinctive lava stone look
      • Scratch and wear resistant
      • Liquid-tight, strong and low-maintenance
      • Suitable for underfloor heating
      • Water-based, solvent-free and low-odour
      • High opacity and strong adhesion to most substrates
      • Long pot life, so you can work calmly, section by section

      Application and drying time

      Apply the layers at a room temperature between 15 and 25 °C and mix both components thoroughly. Thanks to the long pot life you have plenty of time, even if you are doing a larger room on your own. The floor can be walked on after 10 hours and takes full loads after one week.

      The right tools

      With the lava stone tool set you have everything at hand to apply the layers properly. The set contains gloves (2×), overshoes (2×), a roller frame, rollers (3×), a mixing bucket, brushes (2×), a mixing paddle and a filling knife.

      Buy a lava stone poured floor at Ecoatingstore

      With us you order the complete system: primer, base coat, skim coat, topcoat and tools. Free shipping from €50, orders placed before 12:00 are shipped the same day, and you have a 90-day right of return in the original packaging. Questions? Read the frequently asked questions or email info@ecoating.store.

      What should you look out for when ordering a lava stone poured floor?

      Start with the number of square metres you want to treat. You calculate every layer from that: about 100 grams of primer per m², 200 grams of base coat per m², 400 grams of skim coat per m² per skim coat and 80 to 100 grams of topcoat per m². If you opt for a second skim coat for a deeper colour and a more even texture, allow 800 grams of skim coat per m² in total. Order enough of your colour in one go, because a repeat order may show a slight colour difference between batches. Mixed colours are made to order. Also check that you have the right tools at hand: the lava stone tool set includes rollers, brushes, a mixing bucket, a mixing paddle and a filling knife, among other things. Apply the layers at a room temperature between 15 and 25 °C and mix both components thoroughly. The floor can be walked on after 10 hours and takes full loads after one week.